Maxxis Ardent Tire 2022 | Tires

An aggressive tread on a large-volume carcass predestines this trail tire for All Mounain, Freeride and Enduro. Large block-shaped shoulder studs bite into fast curves with many edges. The bevels in the middle of the profile minimize the rolling resistance – 33.5W at 20 km / h and 2 bar.
Ideally suited for rough and loose terrain, it shows its advantages especially on the rear wheel.

Tubeless ready (TR)
tube tubeless tires have many advantages: You can drive with less air pressure. This gives you better traction and reduces rolling resistance. And where there is no tube , the risk of breakdown also decreases. MAXXIS TR tires are better prepared for mounting with sealing milk than other “tubeless ready” tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tube . As a result, the tube free assembly is successful for all rims with standard dimensions as soon as they are inflated and with little liquid.
Even “normal” MAXXIS MTB tires can be fitted with sealant like tires from other manufacturers, as the carcass fabric is very tight.
Only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Note: We strictly advise against the use of ammonia-containing sealing milk. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it up to 30% after just a few months.

EXO Protection
This extremely cut and abrasion resistant material protects the sidewall of various MTB tires. It is very densely woven, light and very flexible. As a result, the performance of the tires remains convincingly good.

DualCompound
Two different rubber compounds are processed into a tread strip. We plan the arrangement of the mixtures according to the desired properties of the tires.

Specifications

Tire type: folding tire / clincher
intended use : AM, EN, FR
Version: Tubeless Ready, EXO
Rubber compound: dual compound
Carcass: 60 TPI
tubeless capable: yes
E-bike compatibility: yes, for e-bikes up to 25 km / h
Profile: for coarse and loose surfaces
Recommended air pressure: 2.5 – 4.5 bar (35-65 PSI)
Recommended rim width: 20-50 mm
Maximum load: n / a

Weight: 903g